MenuSearch | Country: Switzerland | Currency: EUR
VITA GM 1000W 80PLUS Gold Fully Modular ATX 3.1 PSU €154.46
4 in stock
Add to Basket
VITA GM 850W 80PLUS Gold Fully Modular ATX 3.1 PSU €137.03
Only 1 left in stock, 5 more due in 5 days
Add to Basket
VITA GM 750W 80PLUS Gold Fully Modular ATX 3.1 PSU €121.69
Only 2 left in stock, 5 more due in 5 days
Add to Basket
More variations available Show

FSP VITA GM 80PLUS Gold Fully Modular ATX 3.1 PSUs

FSP’s VITA GM power supplies offer the very latest ATX 3.1 and PCIe 5.1 standards - providing an extremely reliable PSU. They are also very quiet, starting at just 12 dBA and offer 80+ Gold efficiency.

Features

  1. Extremely quiet PSU, from only 12dBA
  2. 105C Japanese Bulk Capacitor
  3. ATX V3.1 and PCIe 5.1 compliant with 12VHPWR GPU cable
  4. Powerful single +12V rail design
  5. 80 PLUS Gold certification
  6. Full protections: OCP, OVP, OPP, SCP, OTP, UVP

Complies with Intel Power Design Guide ATX 3.1

Built for the demanding power requirements of tomorrow, these PSUs offer maximum total power excursion support as per ATX 3.1 and PCIe Gen 5.1 specifications, ensuring peak performance with future hardware upgrades.

ATX 3.1 - The Importance of Hold-up Time

Hold-up time indicates the length of time a power supply is able to maintain a consistent output voltage at a regular output level, after it is shut down or in a power shortage. This length of time is able to prevent instabilities in the computer system, or prevent interferences in case of sudden short circuit, overload, power outages, voltage sink in the power system.

Gold-certified Efficiency

Certified by world-class organisations 80PLUS Gold certifications and reach platinum efficiency at typical load for lower power loss, less heat, and quieter operation.

105°C Japanese Bulk Capacitor

Equip your PC with the best-in-class capacitors to offer maximise reliability, performance, and lasting power.

120 mm Hydraulic Bearing (HYB) fan

Quality hydraulic bearings keeps fan noise to a minimum while providing maximum cooling performance at high load levels. The graph below shows the noise outputted at a given load.

Powerhouse Single +12V Rail

This high-amperage +12V rail delivers high load capabilities, it’s ideal for intensive workloads of high-performance CPUs and graphics cards.

The Force Comes with You

Individual CPU 4+4 pin cables provide CPU direct output power to ensure stable operation even under the most demanding workloads.

Power for your Graphics Card

Dual PCIe 6+2Pin cables and a versatile 12V-2x6 (AKA 12VHPWR) cable offer flexible configuration for even the most power-hungry NVIDIA or AMD graphics cards.

Fully Modular Cabling Design

To make power supply installation easy and allows users to use only the needed cables, improving airflow and reducing system clutter.

Compact PSU Size

Measuring just 140mm in length these PSUs are relatively shorter than the industry standard making them ideal for a compact PC or space-constraint environments without compromising on performance.

Fortress-level Protection

Our comprehensive circuit shields your valuable components from harm, featuring OCP, OVP, OPP, SCP, OTP and UVP protection.

Show specifications and reviews for:
SpecificationsVITA-1000GMVITA-850GMVITA-750GM
ModelVITA-1000GM VITA-850GM VITA-750GM
+3.3V maximum output current20A 20A 20A
+5V maximum output current20A 20A 20A
+12V maximum output current83.3A 70.8A 62.5A
Power Output1000W 850W 750W
ATX-Mainboard (20+4-pin)Yes, x1 Yes, x1 Yes, x1
CPU P4/P4 ConnectorYes, x2 Yes, x2 Yes, x2
PCI-Express (6+2-pin)Yes, x4 Yes, x4 Yes, x4
12VHPWR (16-pin)Yes, x1 Yes, x1 Yes, x1
SATA Connectors8 8 8
Molex Connectors4 4 4
Floppy ConnectorsNone None None
PSU Length140 mm 140 mm 140 mm
Input Current12-6A 11-5.5A 10-5A
Input Voltage100-240V 100-240V 100-240V
Input Frequency50-60Hz 50-60Hz 50-60Hz
Form FactorATX 3.1 ATX 3.1 ATX 3.1
CoolingFanned Fanned Fanned
ModularFully Fully Fully
Fan noise levels0-30% load 12 dBA 0-30% load 12 dBA 0-30% load 12 dBA
Noise Level (50% load)17 dBA 13 dBA 13 dBA
Noise Level (max)39 dBA 37 dBA 37 dBA
80 PLUS CertificationGold Gold Gold
PFCActive ≥ 0.9 Active ≥ 0.9 Active ≥ 0.9
Efficiency≥ 90% ≥ 90% ≥ 90%
Fan TypeHYB fan, 120mm HYB fan, 120mm HYB fan, 120mm
ProtectionOCP, OVP, OPP, SCP, OTP, UVP OCP, OVP, OPP, SCP, OTP, UVP OCP, OVP, OPP, SCP, OTP, UVP
Dimensions (L x W x H)140×150×86 mm 140×150×86 mm 140×150×86 mm
Warranty24 months 24 months 24 months
EAN barcode4713224529610 4713224529603 4713224529597
SpecificationsVITA-1000GMVITA-850GMVITA-750GM
ModelVITA-1000GM VITA-850GM VITA-750GM
+3.3V maximum output current20A
+5V maximum output current20A
+12V maximum output current83.3A 70.8A 62.5A
Power Output1000W 850W 750W
ATX-Mainboard (20+4-pin)Yes, x1
CPU P4/P4 ConnectorYes, x2
PCI-Express (6+2-pin)Yes, x4
12VHPWR (16-pin)Yes, x1
SATA Connectors8
Molex Connectors4
Floppy ConnectorsNone
PSU Length140 mm
Input Current12-6A 11-5.5A 10-5A
Input Voltage100-240V
Input Frequency50-60Hz
Form FactorATX 3.1
CoolingFanned
ModularFully
Fan noise levels0-30% load 12 dBA
Noise Level (50% load)17 dBA 13 dBA
Noise Level (max)39 dBA 37 dBA
80 PLUS CertificationGold
PFCActive ≥ 0.9
Efficiency≥ 90%
Fan TypeHYB fan, 120mm
ProtectionOCP, OVP, OPP, SCP, OTP, UVP
Dimensions (L x W x H)140×150×86 mm
Warranty24 months
EAN barcode4713224529610 4713224529603 4713224529597

Product Resources

FAQ

  • Do high wattage power supplies cost more to run?

    No - the rated wattage of a power supply refers to the maximum amount of power it can deliver at full load, not how much power it uses. More powerful PSUs will consume around the same amount of power as lower powered power supplies in any given PC system, so your electricity bill will not be higher when using a more powerful power supply!

    The best way to reduce your electricity bill when using your PC is to use a more efficient power supply or make your PC consume less power by removing components which are not needed, such as extra drives and expansion cards, or by choosing a cooler-running processor or graphics card.

  • My brand new power supply doesn’t work! Am I doing something wrong?

    It’s possible that the power supply may be faulty, but here are some simple things to check. Firstly, a power supply will not work if you simply plug it in and flick the switch. The power supply will only turn on if you connect it to a working motherboard and associated items (processor, memory, video card, etc). It is actually the motherboard which tells the power supply when to switch on.

    Secondly (if applicable), check the voltage is set correctly to 115/230 volts depending on what country you are in. Thirdly, if possible it would be good to try the power supply in another PC to see if it works, or try another power supply in your PC to see if that works. You can then tell whether it is the power supply which is faulty or the actual PC itself. If all else fails, please contact us for further support, and/or return details.

  • Why should I buy a whole new PSU when I could just replace the noisy fan in my existing one?

    Virtually all the noise generated by a PC power supply originates from the cooling fan inside it, so simply replacing the fan with a quiet fan may seem an obvious way to go. However, if you are thinking about attempting this operation, please bear the following points in mind:

    • Your existing power supply will be designed to run with a specific amount of airflow in order to adequately cool the components inside and reducing the airflow may lead to overheating and damage to the power supply and/or PC.
    • All PC power supplies contain very high voltages and even with the power disconnected, the voltages stored in the capacitors can be easily enough to kill. It is not recommended to take the cover off any PC power supply for this reason unless you are absolutely confident of your own ability. Because of the grave dangers involved, all PC power supplies by law carry a warning label forbidding removal of the power supply case.
    • There will be no standard PC fan connector inside the power supply to use to connect a replacement fan, and it would probably have to be soldered directly into the PCB inside the power supply, or have a specialist power connector attached. This can be a tricky operation to say the least.

    Please consider the above points very carefully before proceeding with an operation to replace the fan in your existing power supply!

  • What is PFC (Power Factor Correction)?

    If you are interested in being “green” and saving the planet, you might like to read a short explanation of how our power supplies can save energy using Active PFC (Power Factor Correction), not to be confused with Power Conversion Efficiency which is also very good in most of our PSUs. “Power Factor” is a measure of how efficiently electrical power is consumed. Ideally, Power Factor would be 1 (or 100%) and known as unity.

    Unfortunately in the real world, Power Factor is reduced by highly inductive loads down to values of 0.7 (70%) or less. This induction is caused by equipment such as small electric motors, fans, fluorescent lighting ballasts and transformers such as those in PSUs. This is bad news for the electricity generating companies who can impose a surcharge on heavy users if they have a consistently low Power Factor, as more electricity has to be produced to make up the shortfall.

    Power Factor Correction (PFC) is used in some equipment to minimise the inductive component of the electrical current. This helps to reduce the losses in the electrical supply to that equipment. Power Factor Correction capacitors are normally used to reduce induction in an electrical load, which minimises wasted energy and hence improves the efficiency of a company and reduces electricity costs.

    It is not usually practical to reach unity, i.e. Power Factor 1, and it seems that most electricity supply companies accept consumers having a Power Factor as low as 0.94 (94%) without imposing a surcharge. Unfortunately most of the cheap (and not so cheerful) PSUs tend to have a Passive PF as low as 0.75 or 75% which in a large office can lead to a PF surcharge.

    However, the good news is that most of Quiet PC’s PSUs implement a system known as Active PFC which involves some clever electronics. This means that their power factor (PF) can be as high as 0.94 or 94% (at full load), while harmful harmonic frequencies are reduced to well below legal requirements. So by using our products, you can be happy in the knowledge that you are doing your bit to save the planet!

  • How do I know what size of wattage power supply I need?

    The best answer we can give to this question is to go ahead and take an intelligent “guesstimate”! There are no hard and fast rules about what size of power supply any given PC needs as a minimum. Our advice would be that if you are replacing an existing power supply, then consider a new one at least of the same wattage as the old one. In addition, if you wish to build in a “safety margin” to allow for reliable running and possible future upgrades, consider adding 100-200 watts to the rating of your existing unit.

    If you are building a new PC, most customers now buy a power supply rated in the region of 500-800 watts depending primarily on the performance level of their graphics card(s) and number of drives to be installed. But in any event if you are unsure about which power supply would be best for your PC then please do contact us by phone or email and we will be happy to give you a specific recommendation based on your budget.

  • My new PSU came with a 24-pin connector but my motherboard needs 20 pins! Do I need an adaptor cable?

    We receive many customer enquiries about this. In fact, most of the 24-pin compatible power supplies we sell come with special motherboard connectors which can be converted to 20-pins with no additional conversion cables. All you need to do is look carefully at the connector and you will see that the end four pins can be slid off, turning the connector into a 20-pin compatible one (see below) - easy when you know how!

    Image showing how to change a power supply’s 24-pin motherboard connector into a 20-pin connector by unclipping the end four-pin block
    Image showing how to change a power supply’s 24-pin motherboard connector into a 20-pin connector by unclipping the end four-pin block
  • What do the PSU safety protection abbreviations mean?

    There are many possible safety protections a PSU can have. Below is a list of what each abbreviation means. Please note, not all PSUs have all safety protections.

    More information on certification marks can be found here.

Top Quiet Power Supplies