MenuSearch | Country: Switzerland | Currency: EUR
FC5WS EVO Black No Optical Fanless HTPC Aluminium Chassis
Discontinued
FC5OD EVO Silver Fanless HTPC Aluminium Chassis
Discontinued
FC5WS EVO Silver No Optical Fanless HTPC Aluminium Chassis
Discontinued
More variations available Show

Streacom FC5 EVO Full Aluminium Low Profile Fanless Chassis

The shot-blasted FC5-EVO makes its presence known in the HTPC market with its low profile look, fanless cooling and 100% aluminium construction! Looking for a new HTPC case? You just might have found it!

PLEASE NOTE: The only difference between the FC5OD and the FC5WS chassis is that the FC5OD has a slot for a slot-loading optical drive, where the FC5WS does not.

Introducing Streacom’s updated version of the FC5, the new and improved FC5 EVO! It boasts 100% fanless cooling of CPUs with a TDP of up to 65 watts and is constructed solely of aluminium. It has a super low profile look with a slot-loading optical drive bay slot and is able to accommodate a range of different hard drives.

Features

  1. Build a completely fanless media centre PC
  2. Extremely low profile chassis
  3. Supplied with fanless heatpiped CPU cooler
  4. Side heatsinks cool CPU without the need of fans
  5. Compatible with Micro ATX or smaller motherboards
  6. No optical drive slot for minimalistic looks *
  • *FC5WS EVO Black, FC5WS EVO Silver only

Many home theatre chassis are finished with the brushed aluminium effect, but the FC5 is not like other home theatre chassis. Streacom have finished the FC5 in a very fine shot-blasted finish which gives an elegant pitted look to the aluminium rather than a lined look which brushing produces. It is all down to personal preference as to which looks better but one advantage that a shot blasted finish has over a brushed finish is that it does not leave visible fingerprints behind as brushed aluminium finishes often does.

Recommended Components

Streacom have a comprehensive build guide that provides general tips and suggestions on what should be considered when building in a Streacom case and how to achieve the best results.

Motherboard and CPU - The FC5 EVO is compatible with Micro-ATX and Mini-ITX motherboards. Depending which motherboard you opt for will determine which CPU to use. The case is capable of cooling virtually all CPUs that have a TDP of 95W or lower.

One important point to note when selecting a motherboard is that the board must not have the 24-pin ATX connector (shown in red in the image below or any tall heatsinks) located under the heatpipes otherwise the nano / pico PSU adapter will obstruct the them and it will prevent the CPU block from being fitted.

Note: Although it is stated that the overall cooling ability of the case is 95w we strongly advise using a processor with a TDP of 65W or lower to avoid using too much power than the Nano-PSU can provide. We have a selection of Intel LGA1155 CPUs available that produce 65W or lower which can be found here.

Power Supply - We recommend using a fanless Nano PSU which can provide up to 150W of power. This is more than enough to power a CPU that has a TDP of 65W along with suitable peripherals. It is recommended not to overload the number of peripherals; two HDDs (or one SSD and one HDD), one optical drive, a TV tuner and obviously a motherboard should not be a problem for this miniature PSU.

Alternatively, Streacom now has available a 240W Internal fanless PSU, the ST-ZF240. That extra 90W (compared to the Nano-PSU) will allow for even more drives to be connected to the system or you may want to opt for a CPU that has a maximum TDP of 95W for greater performance. The ZF240 works best when installed into the FC5 chassis.

Optical Drive - The FC5 uses a new universal eject mechanism so it will work with any slot loading laptop drive regardless of where the eject button is located on the front of the drive. Streacom have already sourced the perfect drives for these cases, take a look at the available drives here. Obviously the FC5WS does not support an optical drive.

Remote Control - If you wish to take control of the PC with the use of a remote control, then look no further than the Streacom Flirc IR receiver. It is designed to fit all Streacom chassis and will work with virtually any remote control. If you don’t have a remote then you may want to consider this.

Thermal Paste - These cases are supplied with thermal paste.

SSD/Hard Disk Drives - The FC5 EVO cases can house up to five drives depending on which size motherboard is fitted and whether 2.5 drives (shown below in pink), 3.5 drives (shown in blue) or a combination of the two sizes are being used. Overlapping areas in the diagram below indicate that either a 3.5 or 2.5 drive can be installed but not both at the same time. Drives marked ITX ONLY can only be used when a Mini-ITX board is fitted rather than a Micro-ATX motherboard, (which is larger). See the specifications table at the bottom of the page for summarised details.

FC5 Image Gallery

Show specifications and reviews for:
SpecificationsFC5OD EVO SilverFC5WS EVO BlackFC5WS EVO Silver
Chassis MaterialAll aluminium, 10mm thick front panel All aluminium, 10mm thick front panel All aluminium, 10mm thick front panel
HDD/SSD Bays (mITX motherboard)1 x 3.5” (rear) + 3 x 2.5” or 1 x 3.5” + 1 x 2.5” or 1 x 3.5” 1 x 3.5” (rear) + 3 x 2.5” or 1 x 3.5” + 1 x 2.5” or 1 x 3.5” 1 x 3.5” (rear) + 3 x 2.5” or 1 x 3.5” + 1 x 2.5” or 1 x 3.5”
HDD/SSD Bays (mATX motherboard)1 x 3.5” + 3 x 2.5” 1 x 3.5” + 3 x 2.5” 1 x 3.5” + 3 x 2.5”
Side Ports2 x USB2.0, right side (USB3.0 Ready, cable sold separately) 2 x USB2.0, right side (USB3.0 Ready, cable sold separately) 2 x USB2.0, right side (USB3.0 Ready, cable sold separately)
Expansion Slot1 x full height/half height expansion slot (riser cable required) 1 x full height/half height expansion slot (riser cable required) 1 x full height/half height expansion slot (riser cable required)
CoolingHeatpipe Direct Touch 4 Pipes – recommended CPU TDP: 65W Heatpipe Direct Touch 4 Pipes – recommended CPU TDP: 65W Heatpipe Direct Touch 4 Pipes – recommended CPU TDP: 65W
Dimension450 x 345 x 72mm (W x D x H) 450 x 345 x 72mm (W x D x H) 450 x 345 x 72mm (W x D x H)
Power SupplyNot supplied - consider a Nano PSU Not supplied - consider a Nano PSU Not supplied - consider a Nano PSU
Remote controlNot supplied - consider the Streacom IR Receiver and Remote Not supplied - consider the Streacom IR Receiver and Remote Not supplied - consider the Streacom IR Receiver and Remote
Net Weight5.2KG 5.2KG 5.2KG
Warranty24 months 24 months 24 months
EAN barcode8718469090327 8718469090334 8718469090341
Manufacturer Product Code
ST-FC5S-EVO
SpecificationsFC5OD EVO SilverFC5WS EVO BlackFC5WS EVO Silver
Chassis MaterialAll aluminium, 10mm thick front panel
HDD/SSD Bays (mITX motherboard)1 x 3.5” (rear) + 3 x 2.5” or 1 x 3.5” + 1 x 2.5” or 1 x 3.5”
HDD/SSD Bays (mATX motherboard)1 x 3.5” + 3 x 2.5”
Side Ports2 x USB2.0, right side (USB3.0 Ready, cable sold separately)
Expansion Slot1 x full height/half height expansion slot (riser cable required)
CoolingHeatpipe Direct Touch 4 Pipes – recommended CPU TDP: 65W
Dimension450 x 345 x 72mm (W x D x H)
Power SupplyNot supplied - consider a Nano PSU
Remote controlNot supplied - consider the Streacom IR Receiver and Remote
Net Weight5.2KG
Warranty24 months
EAN barcode8718469090327 8718469090334 8718469090341
Manufacturer Product Code
ST-FC5S-EVO

Customer Reviews

FC5WS EVO Black
FC5OD EVO Silver
FC5WS EVO Silver

We haven't received any reviews of this product yet.

We haven't received any reviews of this product yet.

Almost perfect...

,

This is a very good and solid case which transmits a sense of quality not only by the finishing but also by the sheer weight. There are no flimsy panels or rough edges. The passive cooler system with all the pipes is also very clever and ‘relatively’ easy to assemble. Actually the whole case is not very difficult to mount except for this one. I say this because I made a mistake and placed some rubber/plastic pieces underneath the motherboard that I mistakenly took for the CPU Cooler Mounting Nuts. There is an amendment to the printed manual for the CPU Coller assembly that can make you a little confused. Also I’m reviewing the electronic manual right now and I can almost swear that the printed one does not mention which screws to use for all the pieces. I didn’t download the electronic one at the time so this was very confusing as there are many small packets. I didn’t receive also the manual for the optional FLIRC receiver. Anyway the support from Quiet PC is really good and you never feel lost and alone. To make this an even better product you just need to properly identify and label every piece and improve the printed manual or else just provide the electronic manuals. Highly recommended just the same.

Top Quiet PC Cases